This premium electret condenser microphone is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. The AT4041 cardioid studio condenser microphone features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. A unique combination of audio excellence and moderate cost, the AT4041 is a rugged microphone housed in a case of turned brass with black chrome plating for durability and low reflectivity. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.
Smooth, extended frequency response with a slight rise occurring in the high-frequency region
Ideal for drum overheads, acoustic guitar, piano, horns and under snare
Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
Switchable hi-pass filter and rugged turned-brass microphone housing
Custom shock mount provides superior isolation
Microphone Connectivity - Wired
Microphone Type - Electret Condenser
Polar/Pickup Pattern - Cardiod
Spec Sheet available - Yes
Impedance:
100 ohms
Maximum Frequency Response (Bandwidth):
20 kHz
Maximum Frequency Response (Bandwidth):
20000 Hz
Minimum Frequency Response (Bandwidth):
20 Hz
Minimum Frequency Response (Bandwidth):
0.02 kHz
Dynamic Range:
121 dB
Impedance:
100 ohm
Maximum SPL (Sound Pressure Level):
145 dB
Signal to Noise Ratio:
70 dB
Wireless:
No
Current Draw:
0.03 Amps
DC Voltage:
48 Volts
Product Weight:
0.26 lbs
Element:
Fixed-charge back plate, permanently polarized condenser
Low Frequency Roll-off:
80Hz, 12dB/octave
Sensitivity:
-36 dB
Length:
6.28 in
Body Diameter:
0.83 in
connector type:
Integral 3-pin XLRM
Accessories Furnished:
AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case
Content, including images, displayed on this website is protected by copyright laws. Downloading, republication, retransmission or reproduction of content on this website is strictly prohibited. Terms of Use
| Privacy Policy