Navitar has developed an improved BrightLight LED controller. Features of the controller include: new functionality of dual current output (350mA/700mA), new box now available with flanges for rack mounting, higher resolution on manual potentiometer control, and 12 volt DC input.
Power Connector: 12VDC, center-positive, 2.1 mm x 5.5 mm barrel
Power LED: ON = 5v board supply is present
High/Low Current LED: ON = 700mA maximum LED current, OFF = 350mA maximum LED current
RS232 Interface: Connection to PC made via standard RS232 Cable 3400 bps, 8 bit, no parity, one stop bit
USB Interface: Connection to PC made via standard USB cable to USB port. Requires installation of FTDI virtual COM port (VCP) driver on PC
Rotary Encoder: Manual LED control – 0.1% resolution
LED Connector: 6 pin mini-DIN, Constant-current sink, To enable HIGH/LOW current switch: Pins 3->5 and Pins 4->6, Must be tied together on LED harness
DC Voltage:
12 Volts
1-40042
- LED Desktop Controller with 12V Universal Power Supply
1-40045
- LED Flange Mount Controller with 12V Universal Power Supply
Content, including images, displayed on this website is protected by copyright laws. Downloading, republication, retransmission or reproduction of content on this website is strictly prohibited. Terms of Use
| Privacy Policy