The DB-RC4ST is a wall-box mounted remote module designed to directly control an RDL ST-SX4 Audio Switcher Module. The ST-SX4 provides solid-state switching of one of four unbalanced audio inputs to a single unbalanced audio output. The DB-RC4ST connects directly to the POWER and CTRL terminals of the ST-SX4 using either a 3-conductor cable or a single shielded pair.
The front panel of the DB-RC4ST features four pushbuttons with four associated LEDs. Upon initial application of power, source 1 is selected. Touching any of the other three buttons de-selects source 1 and immediately selects the source corresponding to the button pushed. An LED, adjacent to each button shows which source is selected. For stereo installations, the SLAVE output from the ST-SX4 is used to drive the CTRL input of an additional ST-SX4.
Remote Selection of 4 Audio Sources
Single-Button Selection for Each Source
Remote Selection of Unbalanced Audio Sources
3-Conductor Remote Wiring
Professional Aesthetic Appearance
Companion to other RDL® Remote Controls
Systems Controlled - Audio
Spec Sheet available - Yes
Selectors (4)::
Momentary pushbuttons (1 for each channel)
Indicators (4)::
Red LEDs (indicates channel selected)
Connections::
Detachable terminal block; Interfaces directly with RDL ST-SX4
Power Requirement::
GROUND-REFERENCED, 24 Vdc @ 30 mA
Mounting::
Mounts in standard US electrical box, RDL WB- or SMB- series boxes; cover plate available separately
Content, including images, displayed on this website is protected by copyright laws. Downloading, republication, retransmission or reproduction of content on this website is strictly prohibited. Terms of Use
| Privacy Policy