40W stereo audio power amplifier with 2 unbalanced line level inputs on high-reliability gold plated phono (RCA) jacks. A front-panel recessed gain control trimmer permits setting the desired amplifier output level for each channel. The gain range accommodates the range of typical unbalanced audio signal levels. Each of the 2 outputs will drive a 4ohms or 8ohms speaker or multiple speakers connected to present a 4ohms or 8ohms load to the amplifier. The output impedance is switch-selectable on the front panel of the module.
Stereo audio power amplifier
Left and right unbalanced phono jack inputs
Switch-selectable stereo or mono operation
Studio quality, transparent compressor/limiter
LED to indicate audio compression threshold
Outputs drive 4 or 8ohms speaker
High-efficiency class D operation
Thermal and short-circuit protection
Amplifier Signal Type - Audio
Amplifier Type - Power Amplifier
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
Shipping Weight:
0.40 lbs
Noise:
< -75 dB (Below 20Wrms)
INPUT:
Line level (-10dBV nominal unbalanced), left and right
Content, including images, displayed on this website is protected by copyright laws. Downloading, republication, retransmission or reproduction of content on this website is strictly prohibited. Terms of Use
| Privacy Policy