The product group consists of a 1T-CT-653-USWP Transmitter coupled with a 1T-CT-654-USWP Receiver which employs HDMI v1.4 capability and HDBaseT 5Play™ technology to allow transmission of uncompressed, 1080p high definition television signals over a single Cat.5e or Cat.6 cable (this is the type cable typically employed for Ethernet computer networks). HDMI v1.4 signals - including 3D and 4K x 2K formats - are supported and the system will also allow DVI signal transmission with appropriate DVI to HDMI Cable adapters. In addition, embedded 7.1CH LPCM, Dolby TrueHD and DTS-HD Master Audio capability is standard. The 1T-CT-653-USWP/1T-CT-654-USWP system can achieve signal distribution distances of up to 100 meters (325 feet) for uncompressed 1080p signals without signal degradation. Control signals can be transmitted (Ethernet, Infrared or RS- 232) and PoH (Power Over HDBaseT) technology is employed to allow powering of the Receiver from the Transmitter, negating the need for a separate power supply for that unit.
HDMI with 3D, 4k(24Hz/30Hz) support
Compliant with HDMI v1.4a, HDCP 1.1 and DVI 1.0 specifications
Uncompressed signal distribution to 100 meters (325 feet)
Uses HDBaseT performance enhancing technology
Full HD resolution support (1080p@60Hz/36bit), UHD support (4k@30Hz)
HD 3D formats & PC resolutions up to WUXGA
Supports Embedded HDMI Lossless Digital Audio
Supports CEC bypass
Uses a single Cat.5e/Cat.6/Cat.6a/Cat.7 Ethernet cable via RJ45 connectors
Bi-directional Infrared remote control extension support
Bi-directional RS-232 remote control
Bi-directional Ethernet support
Receiver supports both PoH (Power over HDBaseT) and local power.
Designed for installation into 3.7” x 2.8” wall cut outs or standard 2 gang low voltage electrical boxes
Content, including images, displayed on this website is protected by copyright laws. Downloading, republication, retransmission or reproduction of content on this website is strictly prohibited. Terms of Use
| Privacy Policy