The AT899cW subminiature clip-on/lavalier omnidirectional condenser microphone includes a 1.4m (55") permanently attached miniature cable terminated with a locking 4-pin connector for use with Audio-Technica UniPak body-pack transmitters.
1.4m (55") permanently attached miniature cable terminated with a locking 4-pin connector
Suitable for use with Audio-Technica UniPak body-pack transmitters
Maximum intelligibility and clean, accurate reproduction for vocalists, lecturers, stage and television talent, and houses of worship
Low-profile design (a mere 5mm in diameter) is ideal for applications requiring minimum visibility
Operates on battery or phantom power
All wireless models available in either low-reflectance black or beige
Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, element covers, interchangeable single and double mic holders
Accessories available separately include complete accessory kits, clothing clips, three-pack element covers and three-pack windscreens
9.8ft (3m) cable permanently attached to mic, TA3F connector at power module
RoHS compliant—free from all substances specified in the EU directive on hazardous substances
Microphone Connectivity - Wireless
Microphone Type - Condenser
Polar/Pickup Pattern - Omnidirectional
Warranty - Yes
ROHS Compliant - Yes
Wireless - Yes
Cable Length:
4.59 ft
Maximum Frequency Response (Bandwidth):
20 kHz
Maximum Frequency Response (Bandwidth):
20000 Hz
Minimum Frequency Response (Bandwidth):
20 Hz
Minimum Frequency Response (Bandwidth):
0.02 kHz
Dynamic Range:
108 dB
Impedance:
250 ohm
Maximum SPL (Sound Pressure Level):
138 dB
ROHS Compliant:
Yes
Signal to Noise Ratio:
64 dB
Wireless:
Yes
Current Draw:
0 Amps
Product Weight:
0.22 lbs
Warranty (Length/Type):
2 Years/Limited End-user
Sensitivity:
-43 (Phantom)/-46 (Battery) dB
Length:
0.63 in
Body Diameter:
0.20 in
DC Voltage:
11 to 52 Volts
DIMENSIONS (POWER MODULE):
5.71 (long), 0.83 (diameter) in
OUTPUT CONNECTOR (POWER MODULE):
Integral 3-pin XLRM
Case Style:
M29
AT831R
- Cardioid condenser lavalier microphone (clip on) with phantom power operation
AT898cW
- Subminiature cardioid condenser lavalier microphone with 55" cable terminated with locking 4-pin HRS-type connector for Audio-Technica wireless systems using UniPak transmitters
Content, including images, displayed on this website is protected by copyright laws. Downloading, republication, retransmission or reproduction of content on this website is strictly prohibited. Terms of Use
| Privacy Policy