Run color video up to 2200 feet (670.5 m) or black-and-white up to 2500 feet (762 m).
Eliminates bulky and expensive coax cable, so you can connect CCTV security equipment to UTP cable already installed in a building.
Compact enough to fit alongside a security camera, a video multiplexor, or another video device in a tight area.
The weather-resistant unit features BNC and screw terminal connections, a polarity identification label, and cable strain relief.
Why install a lot of new coax wiring when you want to add a security camera to your application? With this convenient video balun, you can use your existing UTP cabling instead!
Transmits CCTV video signals via a single UTP cable wired to a terminal strip.
Balun Type - CCTV
Balun Type - Video
ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
131 F
Operating Temperature (Minimum):
32 F
Maximum Distance:
2500 ft
Certifications:
CE, FCC
Insertion Loss:
2 dB
Regulatory Compliance:
WEEE, TAA
Warranty (Length/Type):
Lifetime
Bandwidth:
DC to 8 MHz
Cable Requirements:
CAT3 or higher UTP: Solid copper, 24 gauge or lower
Impedance: 100 ohms; also works with standard audio with RCA connectors, and 75-ohm coax
Distance (Maximum) :
CAT5 UTP: Color: 2200 feet (670.5 m)
Black-and-white: 2500 ft. (762 m)
Systems Supported:
NTSC, PAL, SECAM
Connectors:
(1) BNC M, (1) screw terminal
Power:
From the interface
RF Input (Maximum):
1.1 volts at 60 Hz
Common-mode Rejection:
Greater than 40 dB over the frequency range
Content, including images, displayed on this website is protected by copyright laws. Downloading, republication, retransmission or reproduction of content on this website is strictly prohibited. Terms of Use
| Privacy Policy