The PT-571 is a DGKatâ„¢ twisted pair transmitter for HDMI signals. The PT-571 converts an HDMI signal to a single twisted pair signal and the PT-572+ converts the twisted pair signal back to an HDMI signal.
Max. Data Rate - 1.65Gbps
HDTV Compatible
HDCP & HDMI 1.3 Compliant
System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable
Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable
Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat723 cable
Cable - For optimum range and performance, use Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat723 cables
Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges
Status LED - Lights red when receiving power only, orange when output and power are attached, and yellow when both an active input and output are attached
Power Connectâ„¢ System - A single connection to the transmitter powers the receiver
Ultra-Compact Pico TOOLSâ„¢ - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter
Extender Type - HDMI
Warranty - Yes
Spec Sheet available - Yes
Depth:
2.10 in
Height:
1 in
Width:
2.40 in
Inputs:
1 HDMI connector
Outputs:
1 RJ-45 connector
Bandwidth:
Supports up to 1.65Gbps bandwidth per graphic channel
COMPLIANCE WITH HDMI STANDARD:
Supports HDMI 1.3 and HDCP
Content, including images, displayed on this website is protected by copyright laws. Downloading, republication, retransmission or reproduction of content on this website is strictly prohibited. Terms of Use
| Privacy Policy