4x1 Computer Graphics Video & Stereo Audio Standby Switcher
Series: Main
Model: VP-411DS
Part #: 51-70654190
High Bandwidth - 300MHz (-3dB)
Looping Input - Input 1
Automatic Standby Switching - Priority can be set for each of the 4 inputs via DIP-switches
Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled
The VP-411DS is a high-performance switcher for computer graphics video signals, with-resolutions up to and exceeding UXGA, and unbalanced stereo audio signals. When configured as a standby switcher, the switching priority can be set for each of the four inputs.
High Bandwidth - 300MHz (-3dB)
Looping Input - Input 1
Automatic Standby Switching - Priority can be set for each of the 4 inputs via DIP-switches
Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled
Primary Input - Selectable
Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®-based Kramer software is included), contact closure, & IR remote (included)
Output Disconnect
Front Panel Lockout
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with an optional RK-1 rack adapter
Rackmountable - Yes
Supported Resolution - UXGA (1600x1200)
Switcher Audio Input Signal Type - Stereo Audio
Switcher Connector Type - Other
Switcher Type - Audio
Switcher Type - Computer
Switcher Type - Video
Switcher Video Signal Supported - Component
Warranty - Yes
Spec Sheet available - Yes
Product Weight:
2.43 lbs
Number of Inputs:
4
Number of Outputs:
1
Current Draw:
0.23 Amps
DC Voltage:
12 Volts
Depth:
6.40 in
Height:
1.70 in
Width:
8.46 in
Inputs:
4 UXGA with loop on IN 1 on 15-pin HD connectors, 4 unbalanced stereo audio with loop on IN 1 on 3.5mm mini jacks
Outputs:
1 UXGA on a 15-pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack
Controls:
Input selector; PANEL LOCK and OFF pushbuttons; IR remote control reception window; connector for extended IR reception; RS-232 connector; contact closure terminal block for external wire switching; input priority selector DIP-switches; normal/Kr-isp® and program/normal mode selectors via slide switches on the underside
Coupling:
VIDEO: DC
AUDIO: DC
Audio THD + Noise:
0.004% @1kHZ
Audio 2nd Harmonic:
0.002% @1kHZ
Accessories:
Power supply, IR remote control
Options:
RK-1 19" rack adapter, external remote IR receiver cable
Content, including images, displayed on this website is protected by copyright laws. Downloading, republication, retransmission or reproduction of content on this website is strictly prohibited. Terms of Use
| Privacy Policy