Microphones : Vocal / Announcer / Interview Microphones : Nady Systems, Inc. - Pro Audio - TRM-6

Tube Ribbo Microphone

Model: TRM-6

Low-tension 45mm long, 2-micron thick aluminium ribbon design with typical “large, mellow” ribbon audio reproduction
Smooth, natural extended low and high ends and detailed realistic mids
Unique integrated 12AX7A preamp tube provides unmatched tube audio at levels higher than that of ordinary ribbon mics
Allows the convenience of use with all mixer inputs without requiring external pre-amplification
Versatile design, perfect for numerous applications, including vocal and instrument recording and live sound

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Accessories

Unparalleled sound of a classic ribbon microphone with the natural warmth and musicality of an internal tube preamp sets new standards of performance for ribbon (velocity) microphone. Low-tension 45mm long, 2-micron thick aluminium ribbon design with typical “large, mellow” ribbon audio reproduction.

Low-tension 45mm long, 2-micron thick aluminium ribbon design with typical “large, mellow” ribbon audio reproduction
Smooth, natural extended low and high ends and detailed realistic mids
Unique integrated 12AX7A preamp tube provides unmatched tube audio at levels higher than that of ordinary ribbon mics
Allows the convenience of use with all mixer inputs without requiring external pre-amplification
Versatile design, perfect for numerous applications, including vocal and instrument recording and live sound
Superior overall stunning realism with fast, accurate transient response, ultra-high dynamic range and >135 dB SPL capability
Extraordinary versatility in dialling in the desired sound by varying mic placement
Figure-8 audio directional (pickup) pattern for both front and rear side, with extended sweet spots
Manufactured with the finest materials machined housing with advanced internal shock mount construction for the highest structural integrity and rugged reliability

Microphone Type - Condenser
Microphone Type - Tube
Microphone Type - Ribbon

Maximum Frequency Response (Bandwidth): 18000 Hz
Maximum Frequency Response (Bandwidth): 18 kHz
Minimum Frequency Response (Bandwidth): 30 Hz
Minimum Frequency Response (Bandwidth): 0.03 kHz
Dynamic Range: 115 dB
Impedance: 200 ohm
Maximum SPL (Sound Pressure Level): 165 dB
Sensitivity: -45 dB
Signal to Noise Ratio: 76 dB
Depth: 7.70 in
Product Weight: 1.78 lbs
Type: Large Ribbon Geometry (LRG) ribbon (velocity) Microphone with integral vacuum tube pre amplifier
Ribbon Type and Dimensions: Pure aluminum, 2 microns thick, 50mm x 5mm (L x W)
Recommended Load Impedance: 1000 ohms
Diameter: 2.30 in (59mm)
Vacuum tube: 12AX7B
Equivalent noise level to IEC 268-4(A weighted): 16 dB
Connector/cable: 7-pin XLR cable (XC-7P), 33ft (3m)
Power Requirement: Dedicated TMPS-6 powering unit (115/230VAC selectable)