A95U is a reversible transformer that matches low or high-impedance microphones to high or low-impedance inputs. The transformer permits use of very long microphone cables with high-impedance microphones. The cable from the transformer to the low-impedance input can be any desired length. The transformer prevents high-frequency loss, level loss, and pickup of noise and hum. The A95U comes furnished with a Male XLR connector on the low-impedance end, with a 1/4 inch phone plug and phone jack adapter on the high-impedance end.
Matches low or high-impedance microphones to high or low-impedance inputs
Permits use of very long microphone cables with high-impedance microphones
Depth:
3.50 in
Frequency Response:
Flat, 20Hz to 20kHz, Response at 20Hz no more than 3dB down from flat
Low Impedance:
75 to 300 ohms (supplied) or 19 to 75 ohms
Medium Impedance:
High (41 kohms with 150 ohms source on 75-to-300 ohms winding)
Dc Resistance Low Impedance:
75 to 300 ohms — 75 ohms, 19 to 75 ohms — 37.5 ohms
DC Resistance- High impedance:
4300 ohms
Case:
Full magnetic shield, steel with gray enamel finish
Diameter:
3/4 in (19mm)
520DX
- Green Bullet Harmonica Microphone with 100Hz to 5kHz Frequency Response
565SD-LC
- Classic Unisphere Vocal Microphone with 50Hz to 15kHz Frequency Response
Content, including images, displayed on this website is protected by copyright laws. Downloading, republication, retransmission or reproduction of content on this website is strictly prohibited. Terms of Use
| Privacy Policy